All these products will be available in a variety of grades to suit any projects needs.
In addition, to provide maximum project flexibility, the above standards can be modified to meet specific technical requirements.
{slider Hollow Sections}
Size:
Hollow Sections:
Square:10 mmx10mm - 500 mmx500mm
Retangular:10mm x 20mm - 600mmx400mm
Round: 1/8" - 4"
Wall Thickness: 0.5 - 20.0mm
Length:0.3 mtr - 18 mtr as customer required
Scaffolding Tube:
Outer Diameter: 38mm, 42mm, 48.3mm-48.6mm
Wall Thickness: 2.0mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.85mm, 4.0mm
Length: 0.3mtr -18 mtr
Process:
Seamless: Hot Rolled, Hot Explored
Welded: ERW, HFW
Coating: Hot-dipped Galvanised, Electrical Galvanised
Raw Material:
Seamless: Pipe Billet( Hot Rolled, or Con-casting), Mother Pipe
Welded: Hot Rolled Steel Coil (HRC) , Cold Rolled Steel Coil (CRC), Pre-pained Galvanized Steel Strip
End: Square cut, Burr removed
Surface:Lightly oiled, Hot dip galvanized, Electro galvanized, Black
Heat Treatment: Bright Annealed, Black Annealed
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection
{slider Hot Rolled Plates}
Specifications
- API 2H/2W Gr 50 and Gr 60
- EN 10225 Gr S355 G8 + M/N to S460 G2 +Q/M
- EN 10025 Gr S235 JR to S355 K2 G3/G4
- EN 10113 Gr S275 N/M to S460 NL/ML
- EN 10028 Gr P275 NL/ML to P460 NL/ML
- ASTM A36 / A572 Gr 50 / A283 Gr C / JIS Gr SS400
- A131 Gr A to EH36
- ABS / LRS / GL / DNV Gr A to EH36 / E36
- EN 10225-6 Gr S690 QL, S890 QL and S960 QL
- Wear Resistant Steel in HB 300 to HB 500 as well as EN 10155 Gr S355 J0W and S355 J2W
{slider Seamless Tubulars}
Specifications
- API 5L Gr B to Gr X 70
- EN 10225 Gr S355 G15+N
{slider Welded Tubulars}
Specifications
- API 5L Gr B to Gr X 70
- API 2H / 2W Gr 50 and in any other plate grades to meet Client/ Project's specification
- Manufacturing Tolerance to API 2B or API 5L
{/sliders}
